Omnipure L5520 For Cyst, Chlorine, Taste and Odours

$69.00

Omnipure L5520 For Cyst, Chlorine, Taste and Odours

  • Carbon Block Filter Cartridge
  • Removes particles down to 1 microns
  • MPN: L5520
  • Omnipure L Series Model
  • 10″ x 2.5″  Filter Size
Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.

 

Out of stock

Omnipure

Description

Omnipure L5520 For Cyst, Chlorine, Taste and Odours

  • Carbon Block Filter Cartridge
  • Removes particles down to 1 microns
  • MPN: L5520
  • Omnipure L Series Model
  • 10″ x 2.5″  Filter Size

Works with water that has been previously disinfected. Not suitable with water that is micro biologically unsafe or of unknown quality without adequate disinfection before the system.

High Capacity

  • Omnipure L5520 is capable of filtering 2,500 gallons.

Effective for chlorine removal

  • Laboratory studies have shown at least 99% chlorine reduction with an influent chlorine concentration of 2.22 ppm.

Effective for cyst removal

  • Laboratory studies have shown at least 99.95% reduction with an influent challenge of 104,457 Particles.

Suitable for caravans

  • Its convenient size allows the filter to be used when traveling in a caravan or when traveling in general.

Proven effectiveness

  • Laboratory tested for easy and effective water treatment.
  • Omnipure L5520 is Certified by NSF Standard 42 for Chlorine Taste and Odour Reduction. Also, NSF Standard 53 for Cyst Reduction.
  • Manufactured by Omnipure
  • Designed and Made in the USA Filters

Small micron rating

  • Removes particles greater than 1 micron.

Small Size

  • Measures 10 inches in length and 2.5 inches in width and depth.

Light weight

  • Omnipure L5520 weights 500 g.

Additional information

Weight 0.5 kg
Dimensions 25 × 5 × 5 cm
Service Life

1 Year (2,500 Gallons)

Operating Temperature

For installation on cold water lines only (40 – 100 F) (2-38 C)

Technology

Carbon Block

Flow Rate

0.50 GPM (1.9 LPM)

Maximum Pressure

8.6 bar, 125 PSIG

Filter Size

10″ x 2.5″

Omnipure L-Series Model

L5520

Micron Rating

1

Reduction Claim

Chlorine, Taste and Odours, Parasites (Cryptosporidium, Giardia), Volatile Organic Compounds (Benzene, Ethylene, Formaldehyde…)

Brand

Omnipure

Omnipure is a world class manufacturer of inline water filters and filter cartridges in the USA. They produce over a dozen unique series of filters offering solutions to nearly any point of use water filtration problem.
Omnipure

Maintenance Requirements

  • Note flow direction of filter.
  • Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • Replace cartridge when rated capacity (2,500 gallons) is reached, or when flow becomes too slow.
  • Install in compliance with state and local laws and regulations.

Pre-Filter Requirements

  • The Omnipure L5520 is usually installed with a sediment pre-filter L5505. As high sediments in water can block prematurely the L5520.
  • The Omnipure L5520 has 1 micron pore size; therefore, removes more contaminants compared to the L5540, which has 5 micron pore size.
  • Also, because the L5540 uses granular activated carbon and has 5 micron pore size, sometimes can be installed by itself, without a sediment pre-filter.

Certifications

  • The L-Series filter housings and fillings have been rested for performance under NSF Standard 42. Tests included Hydrostatic Testing at 300 psig and Cycle Testing of 100.000 Repetitions from 1 to 150 psig. Complete test results are available from OMNIPURE.
  • Omnipure products are tested and listed under Standard 42 for taste, odor and chlorine reduction or particulate reduction.

Warranty

Omnipure Filter Company (Omnipure) warrants that the products delivered will be free from any defects in workmanship or materials.

Further, the warranty provided herein applies, only when used within the products specifications and service life, from the date of installation, beyond which time or use Omnipure is absolved of any and all liability for any use of the product.

In the event of defect or non-conformity, buyer shall promptly notify Omnipure in writing, supplying proof of purchase dates, installation dates, and will protect and retain the products for investigation, or Omnipure is absolved of any and all liability for any use of the product.

There are no other warranties, either merchantability or fitness, either expressed or implied.

 

You may also like…

0