Description
Drink purified and refreshing water from the Omnipure K2540 JJ Inline Filter
- MPN: K2540 JJ
- 10″ x 2″ Carbon block inline filter
- JJ – Quick Connect
- Designed and Made in USA
- Manufactured by Omnipure
- Captures particles greater than 5 microns
- Reduces chlorine, taste, odours
- Needs replacing every 5,678 Litres
- Runs at 3 lpm
- System Tested and Certified by NSF International against ANSI / NSF Standard 42 for the reduction of Chlorine, Class 1 and Taste and Odor.
Visit WA Water Filters for Replacement Filters in Perth, WA – Phone: (08) 6156 0220
Brand
Omnipure
Omnipure is a world class manufacturer of inline water filters and filter cartridges in the USA.
They produce over a dozen unique series of filters offering solutions to nearly any point of use water filtration problem.
Maintenance Requirements
- Note flow direction of the Omnipure K2540-JJ.
- Flush the new Omnipure K2540-JJ with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
- Replace the Omnipure K2540-JJ when rated capacity is reached, or when flow becomes too slow.
- Install in compliance with state and local laws and regulations.
Additional Information
Cap and body are spin welded together producing a smooth, consistent seal without the use of glues or binders that can cause contamination. The result of these design and production techniques is a reliable filter that is fast and easy to install.
One of the primary uses of this product is as a system component. The benefit is derived from the fitting being molded directly into the filter cap, greatly reducing clearance. Shown here (right) is a reverse osmosis system with the traditional 12 in x 2.5 in filter configuration. Notice that all the filters are uniformly attached. This results in the most efficient use of available space and greater filtering performance in a smaller overall area.
