Sale!

Omnipure Q5505 Sediment Filter Cartridge 5 Micron

$60.75

  • Q5505 Sediment Filter Cartridge
  • Omnipure Q-Series Models
  • 10″ x 2.5″  Filter Size
  • NSF Certified for removal of dirt, sand, and sediment reduction
  • Removes particles down to 5 microns
  • Manufactured by Omnipure
  • Designed and Made in the USA Filters
Specs Sheet
Categories: , Tags: , ,
Omnipure

Description

  • Sediment Filter Cartridge
  • MPN: Q5505
  • Omnipure Q-Series Models
  • 10″ x 2.5″  Filter Size
  • NSF Certified for removal of dirt, sand, and sediment reduction
  • Removes particles down to 5 microns
  • Manufactured by Omnipure
  • Designed and Made in the USA Filters

Visit WA Water Filters for Omnipure Replacement Filters in Perth, WA.

Additional information

Weight 0.8 kg
Dimensions 25.4 × 7 × 7 cm
Service Life

12 Months

Operating Temperature

For installation on cold water lines only (40 – 100 F)

Flow Rate

0.5 GPM

Maximum Pressure

8.6 bar

Filtration Media

Polypropylene depth sediment filtration media to reduce dirt, sand, rust, and other particulates

Omnipure Q-Series Model

Q5505

Filter Size

10″ x 2.5″

Micron Rating

5

Reduction Claim

Sediments (Dirt, Rust, Sand, Silt)

Brand

Omnipure

Omnipure is a world class manufacturer of inline water filters and filter cartridges in the USA. They produce over a dozen unique series of filters offering solutions to nearly any point of use water filtration problem.
Omnipure

Features & Benefits

  • Fine filtration of treated drinking water to ingredient water quality
  • Helps standardise beverage quality at disparate locations
  • Reduces maintenance problems in water-using equipment
  • Removes more than 96% of sediment
  • Filters out fine particulates, including dirt, rust, oxidized iron manganese and sulfide
  • Protects other cartridges
  • Stops solid particles (Dirt, Sand, and all Particulate Matter)

Applications

  • Pre-filtration for RO
  • Drinking fountains
  • Ice Machines
  • Other point-of-use application

Specifications

Flow Rate 0.5 gpm
Maximum Operating Pressure 125 psig
Operating Temperature 2 to 38 ºC35 to 100 ºF
Rated Capacity Dependent upon the quality of the influent water
Reduction Claim Dirt, sand, and sediment reduction
Flow Capacity Dependent upon the quality of the influent water

 

  • Threaded fittings must be wrapped with teflon tape before installation
  • Install Teflon taped fittings and tighten firmly
  • Replace cartridge when rated capacity is reached, or when flow becomes too slow
  • Install in compliance with state and local laws and regulations

 

Maintenance Requierements

  • Note flow direction of filter.
  • A For quick connect fittings, push scratch free tube end that has been cleanly and squarely cut into the fitting until it bottoms. Threaded fittings must be wrapped with Teflonâ„¢ tape before installation. Install Teflonâ„¢ taped
    fittings and tighten firmly. Use two wrenches to firmly tighten tubing.
  • A Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • A Replace cartridge when rated capacity is reached, or when flow becomes too slow.
  • A Install in compliance with state and local laws and regulations.

You may also like…

0