Text us on 🇦🇺 +61452435477

Omnipure K5540 BB Inline Filter

$65.00

Omnipure K5540 BB Inline Filter

  • Coconut Shell Granular Activated Carbon Inline Filter
  • MPN: K5540 BB
  • 10″ x 2.5″ Filter Size
  • Omnipure K-Series Model
  • Removes particles down to 5 microns
  • For Chlorine, taste, color, and odor reduction
  • Replace every year or when filter capacity is reached (2,000 gallons)
  • System Tested and Certified by NSF International against ANSI / NSF Standard 42 for the reduction of Chlorine, Class 1 and Taste and Odor.
  • Manufactured by Omnipure
  • Designed and Made in the USA
Specs Sheet
Categories: , , , Tags: , ,
Omnipure

Description

Omnipure K5540 BB Inline Filter

  • Coconut Shell Granular Activated Carbon Inline Filter
  • MPN: K5540 BB
  • 10″ x 2.5″ Filter Size
  • Omnipure K-Series Model
  • Removes particles down to 5 microns
  • For Chlorine, taste, color, and odor reduction
  • Replace every year or when filter capacity is reached (2,000 gallons)
  • System Tested and Certified by NSF International against ANSI / NSF Standard 42 for the reduction of Chlorine, Class 1 and Taste and Odor.
  • Manufactured by Omnipure
  • Designed and Made in the USA

Visit WA Water Filters for Omnipure Replacement Filters in Perth, WA.

Additional information

Weight 0.8 kg
Dimensions 25.4 × 6.35 × 6.35 cm
Service Life

1 Year
Filter Media

Coconut Shell Granular Activated Carbon (GAC)
Connections

1/4″ Female Quick Connect (inlet and outlet)
Operating Temperature

For installation on cold water lines only (40 – 100 F)
Function

Chemical and Mechanical Reduction
Technology

Carbon Block
Flow Rate

5 GPM
Omnipure K-Series Model

K5540
Filter Size

10″ x 2.5″
Micron Rating

5
Reduction Claim

Chlorine, Taste and Odours

Brand

Omnipure

Omnipure is a world class manufacturer of inline water filters and filter cartridges in the USA. They produce over a dozen unique series of filters offering solutions to nearly any point of use water filtration problem.
Omnipure

Specifications

Flow Rate 0.5 gpm
Maximum Operating Pressure 125 psig
Operating Temperature 2 to 38 ºC35 to 100 ºF
Rated Capacity 2,000 gal/1 Year
Reduction Claim Chlorine, taste, color, and odor reduction
Flow Capacity 2,000 gal

 

Maintenance Requirements

  • When installing the Omnipure K5540-BB note flow direction of filter.
  • Flush the Omnipure K5540-BB with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • Replace the Omnipure K5540-BB when rated capacity  s reached, or when flow becomes too slow.
  • Install  the Omnipure K5540-BB in compliance with state and local laws and regulations.

Additional Information

The Omnipure K5540-BB cap and body are spin welded together producing a smooth, consistent seal without the use of glues or binders that can cause contamination. The result of these design and production techniques is a reliable filter that is fast and easy to install.

One of the primary uses of the Omnipure K5540-BB is as a system component. The benefit is derived from the fitting being molded directly into the filter cap, greatly reducing clearance. Shown here (right) is a reverse osmosis system with the traditional 12 in x 2.5 in filter configuration. Notice that all the filters are uniformly attached. This results in the most efficient use of available space and greater filtering performance in a smaller overall area.

You may also like…

0