Omnipure K5520 BB Inline Filter 10″ x 2.5″ 1 Micron

$65.00

Omnipure K5520 BB Inline Filter

  • Carbon Block Inline Filter
  • 10″ x 2.5″ Filter Size
  • Removes particles down to 1 micron
  • For chlorine, taste, odours and parasites.
Specs Sheet
Omnipure

Description

Omnipure K5520 BB Inline Filter

  • Carbon Block Inline Filter
  • 10″ x 2.5″ Filter Size
  • Removes particles down to 1 micron
  • For chlorine, taste, odours and parasites.

High Capacity

  • Omnipure K5520 BB is capable of filtering 2,000 gallons.

Effective for chlorine removal

  • Laboratory studies have shown at least 99% chlorine reduction with an influent chlorine concentration of 2.22 ppm.

Effective for cyst removal

  • Laboratory studies have shown at least 99.95% reduction with an influent challenge of 104,457 Particles.

Suitable for caravans

  • Its convenient size allows the filter to be used when traveling in a caravan or when traveling in general.

Proven effectiveness

  • Laboratory tested for easy and effective water treatment.
  • Omnipure K5520-BB is Certified by NSF Standard 42 for Chlorine Taste and Odour Reduction. Also, NSF Standard 53 for Cyst Reduction.
  • Manufactured by Omnipure
  • Designed and Made in the USA

Small micron rating

  • Removes particles greater than 1 micron.

Small Size

  • Measures 10 inches in length and 2.5 inches width and depth.

Light weight

  • Omnipure K5520 weights 500 g.
Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.

Additional information

Weight 0.8 kg
Dimensions 25.4 × 6.35 × 6.35 cm
Service Life

2500 Gallons Chlorine Removal

Operating Temperature

For installation on cold water lines only (40 – 100 F)

Technology

Carbon Block

Flow Rate

2 LPM

Connection

BB (1/4" Female Thread) Quick Connect

Maximum Pressure

8.6 bar

Capacity

1 Year Approx.

Omnipure K-Series Model

K5520

Filter Size

10″ x 2.5″

Micron Rating

1

Reduction Claim

Chlorine, Taste and Odours, Parasites (Cryptosporidium, Giardia), Volatile Organic Compounds (Benzene, Ethylene, Formaldehyde…)

Brand

Omnipure

Omnipure is a world class manufacturer of inline water filters and filter cartridges in the USA. They produce over a dozen unique series of filters offering solutions to nearly any point of use water filtration problem.
Omnipure

Specifications

Flow Rate 0.5 gpm
Maximum Operating Pressure 125 psig
Operating Temperature 2 to 38 ºC35 to 100 ºF
Rated Capacity 2,000 gal/1 Year
Reduction Claim Cyst, chlorine, taste, color, odor and VOC reduction
Flow Capacity 2,000 gal

 

Maintenance Requirements

  • Note flow direction of filter.
  • Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • Replace cartridge when rated capacity (2,000 gallons) is reached, or when flow becomes too slow.
  • Install in compliance with state and local laws and regulations.

Not suitable with water that is micro biologically unsafe or of unknown quality without adequate disinfection before the system.

You may also like…

0