Text us on 🇦🇺 +61452435477
Omnipure K5555-BB Resin

Omnipure K5566 BB Fluoride Removal Inline Filter

$105.00

  • Fluoride Removal Inline Filter
  • MPN: K5566 BB
  • Manufactured by Omnipure
  • Made in the USA
  • 10″ x 2.5″ Inline Filter
  • 5 Micron pore size
  • Capable of filtering 200 gallons (6 months filter life)
  • Activated Alumina filtration media
  • Reduces more than 90% of fluoride.
Specs Sheet

 

Categories: , , Tags: , ,
Omnipure

Description

This is the Omnipure K5566 BB Fluoride Removal Inline Filter.

  • 1/4″ JJ Quick Connection
  • Omnipure K-Series Model
  • Fluoride Removal Inline Filter
  • MPN: K5566 BB
  • Manufactured by Omnipure
  • Made in the USA
  • 10″ x 2.5″ Inline Filter
  • 5 Micron pore size
  • Capable of filtering 200 gallons (6 months filter life)
  • Activated Alumina filtration media
  • Reduces more than 90% of fluoride.

Additional information

Weight 0.8 kg
Dimensions 25.4 × 6.35 × 6.35 cm
Service Life

6 Months
Filter Media

Activated Alumina
Connections

1/4″ Female Quick Connect (inlet and outlet)
Operating Temperature

For installation on cold water lines only (40 – 100 F)
Flow Rate

0.5 GPM
Omnipure K-Series Model

K5566
Filter Size

10″ x 2.5″
Micron Rating

5
Reduction Claim

Fluoride

Brand

Omnipure

Omnipure is a world class manufacturer of inline water filters and filter cartridges in the USA. They produce over a dozen unique series of filters offering solutions to nearly any point of use water filtration problem.
Omnipure

Specifications

Omnipure K5566-BB

Flow Rate 0.5 gpm
Maximum Operating Pressure 125 psig
Operating Temperature 2 to 38 ºC35 to 100 ºF
Rated Capacity 200 gal/6 months
Reduction Claim Fluoride
Flow Capacity 200 gal/6 months

Performance Data Sheet.pdf

Maintenance Requirements

  • Note flow direction of the Omnipure fluoride filter.
  • Flush new Omnipure fluoride filter with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • Replace the Omnipure fluoride filter when rated capacity  is reached, or when flow becomes too slow.
  • Install in compliance with state and local laws and regulations.

Additional Information

Cap and body are spin welded together producing a smooth, consistent seal without the use of glues or binders that can cause contamination. The result of these design and production techniques is a reliable filter that is fast and easy to install.

One of the primary uses of this product is as a system component. The benefit is derived from the fitting being molded directly into the filter cap, greatly reducing clearance. Shown here (right) is a reverse osmosis system with the traditional 12 in x 2.5 in filter configuration. Notice that all the filters are uniformly attached. This results in the most efficient use of available space and greater filtering performance in a smaller overall area.

You may also like…

0