Text us on 🇦🇺 +61452435477
Omnipure K2550-BB Alkaliser Inline Filter

Omnipure K2550 BB Alkaliser Inline Filter

$76.00

  • Alkaliser Inline Filter
  • MPN: K2550 BB
  • BB 1/4″ Female Connection
  • Manufactured by Omnipure
  • Omnipure K-Series Filter Model
  • Designed and Made in the USA
  • Mineralising properties
  • Corrects the pH levels in water
  • Introduce minerals such as Calcium, Magnesium, Potassium and more into the water.
  • 10″ x 2″ Inline Filter Size

Available on backorder

Categories: , , , Tags: , ,
Omnipure

Description

Omnipure K2550 BB Alkaliser Inline Filter.

  • Alkaliser Inline Filter
  • MPN: K2550
  • BB 1/4″ Female Connection
  • Manufactured by Omnipure
  • Omnipure K-Series Filter Model
  • Designed and Made in the USA
  • Mineralising properties
  • Corrects the pH levels in water
  • Introduce minerals such as Calcium, Magnesium, Potassium and more into the water.
  • 10″ x 2″ Inline Filter Size

Visit WA Water Filters for Omnipure Filters in Perth, WA.

Additional information

Weight 0.8 kg
Dimensions 25.4 × 5 × 5 cm
Service Life

6 Months
Operating Temperature

For installation on cold water lines only (40 – 100 F)
Flow Rate

1.9 LPM
Connection

BB (1/4"Female Thread) Quick Connect
Maximum Pressure

8.6 bar
Omnipure K-Series Model

K2550
Filter Size

10" x 2"
Reduction Claim

pH correction

Brand

Omnipure

Omnipure is a world class manufacturer of inline water filters and filter cartridges in the USA. They produce over a dozen unique series of filters offering solutions to nearly any point of use water filtration problem.
Omnipure

Filter Specifications

Flow Rate 0.5 gpm
Maximum Operating Pressure 125 psig
Operating Temperature 2 to 38 ºC35 to 100 ºF
Rated Capacity 6 Months
Reduction Claim Re-mineralization, pH correction
Flow Capacity 6 Months

 

Filter Maintenance Requirements

  • Note flow direction of filter.
  • Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • Replace cartridge when rated capacity  is reached, or when flow becomes too slow.
  • Install in compliance with state and local laws and regulations.

Additional Information

Cap and body are spin welded together producing a smooth, consistent seal without the use of glues or binders that can cause contamination. The result of these design and production techniques is a reliable filter that is fast and easy to install.

One of the primary uses of this product is as a system component. The benefit is derived from the fitting being molded directly into the filter cap, greatly reducing clearance. Shown here (right) is a reverse osmosis system with the traditional 12 in x 2.5 in filter configuration. Notice that all the filters are uniformly attached. This results in the most efficient use of available space and greater filtering performance in a smaller overall area.

You may also like…

0