Name: Omnipure Q5605 Sediment Water Filter Cartridge 5 Micron
SKU: IT000183
Price: 69.00 AUD
Availability: InStock

Description

Additional information

Weight	0.8 kg
Dimensions	30 × 7 × 7 cm
Service Life	12 Months
Operating Temperature	For installation on cold water lines only (40 – 100 F)
Flow Rate	0.5 GPM
Maximum Pressure	8.6 bar
Filtration Media	Polypropylene depth sediment filtration media to reduce dirt, sand, rust, and other particulates
Omnipure Q-Series Model	Q5605
Filter Size	12″ x 2.5″
Micron Rating	5
Reduction Claim	Sediments (Dirt, Rust, Sand, Silt)

Fine filtration of treated drinking water to ingredient water quality
Helps standardise beverage quality at disparate locations
Reduces maintenance problems in water-using equipment
Removes more than 96% of sediment
Filters out fine particulates, including dirt, rust, oxidized iron manganese and sulfide
Protects other cartridges
Stops solid particles (Dirt, Sand, and all Particulate Matter)

Flow Rate	0.5 gpm
Maximum Operating Pressure	125 psig
Operating Temperature	2 to 38 ºC35 to 100 ºF
Rated Capacity	Dependent upon the quality of the influent water
Reduction Claim	Dirt, sand, and sediment reduction
Flow Capacity	Dependent upon the quality of the influent water

Note flow direction of filter.
A For quick connect fittings, push scratch free tube end that has been cleanly and squarely cut into the fitting until it bottoms. Threaded fittings must be wrapped with Teflon™ tape before installation. Install Teflon™ taped
fittings and tighten firmly. Use two wrenches to firmly tighten tubing.
A Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
A Replace cartridge when rated capacity is reached, or when flow becomes too slow.
A Install in compliance with state and local laws and regulations.