Text us on 🇦🇺 +61452435477
Omnipure K5540-JJ Inline Filter

Omnipure K5540 JJ Inline Filter

$65.00

  • Coconut Carbon Inline Filter
  • MPN: K5540 JJ
  • JJ 1/4″ Quick Connection
  • Reduces Chlorine, taste, color, and odor
  • System Tested and Certified by NSF International against ANSI / NSF Standard 42 f
  • Manufactured by Omnipure
  • Designed and Made in the USA
  • Omnipure K-Series Filter Model
  • 10″ x 2.5″ Inline filter size
  • 5 Micron pore size

Visit WA Water Filters for Omnipure Filters in Perth, WA.

Categories: , , Tags: ,
Omnipure

Description

Omnipure K5540 JJ Inline Filter.

  • Coconut Carbon Inline Filter
  • Omnipure K-Series Filter Model
  • MPN: K5540 JJ
  • JJ 1/4″ Quick Connection
  • Reduces Chlorine, taste, color, and odor
  • System Tested and Certified by NSF International against ANSI / NSF Standard 42 f
  • Manufactured by Omnipure
  • Designed and Made in the USA
  • 10″ x 2.5″ Inline filter size
  • 5 Micron pore size

Visit WA Water Filters for Omnipure Filters in Perth, WA.

Additional information

Weight 0.8 kg
Dimensions 25.4 × 6.35 × 6.35 cm
Service Life

1 Year
Filter Media

Coconut Shell Granular Activated Carbon (GAC)
Connections

1/4″ Female Quick Connect (inlet and outlet)
Operating Temperature

For installation on cold water lines only (40 – 100 F)
Function

Chemical and Mechanical Reduction
Technology

Carbon Block
Flow Rate

5 GPM
Omnipure K-Series Model

K5540
Micron Rating

5
Reduction Claim

Chlorine, Taste and Odours
Inline Filter Size

10" x 2.5"

Brand

Omnipure

Omnipure is a world class manufacturer of inline water filters and filter cartridges in the USA. They produce over a dozen unique series of filters offering solutions to nearly any point of use water filtration problem.
Omnipure

Specifications

Omnipure K5540-JJ

Flow Rate 0.5 gpm
Maximum Operating Pressure 125 psig
Operating Temperature 2 to 38 ºC35 to 100 ºF
Rated Capacity 2,000 gal/1 Year
Reduction Claim Chlorine, taste, color, and odor reduction
Flow Capacity 2,000 gal

Performance Data Sheet.pdf

Maintenance Requirements

  • Note flow direction of the Omnipure K5540-JJ.
  • Flush new Omnipure K5540-JJ with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • Replace the Omnipure K5540-JJ when rated capacity  is reached, or when flow becomes too slow.
  • Install in compliance with state and local laws and regulations.

Additional Information

Cap and body are spin welded together producing a smooth, consistent seal without the use of glues or binders that can cause contamination. The result of these design and production techniques is a reliable filter that is fast and easy to install.

One of the primary uses of this product is as a system component. The benefit is derived from the fitting being molded directly into the filter cap, greatly reducing clearance. Shown here (right) is a reverse osmosis system with the traditional 12 in x 2.5 in filter configuration. Notice that all the filters are uniformly attached. This results in the most efficient use of available space and greater filtering performance in a smaller overall area.

You may also like…

0